Questions for ccie lab study

ccie lab study in the news

How to setup CCM to accept calls from H323 gateways that are not defined locally?

Thu, 03 Aug 2006 00:42:00 +0000
Change the service parameter “Accept Unknown TCP Connection” to True
Default is False

“Variance” - Understanding The Balancing Act

Wed, 17 Sep 2008 21:50:20 +0000
This is an extract from a comment left by a visitor to a previous post on this blog:



“i was going through the bsci section and found about load balancing …

i set up a network in gns3 and tested loadbalancing with bandwidth and variance command
what exactly is the difference between those two ? both ...]

Tartalék 5db E1 csatorna kimenő hívásokra ISDN PRI-n

Sun, 21 Sep 2008 10:43:02 +0000
Az egyik Voice gatewayen a tárgyban említett feature-t kell megoldanom, tehát ne forduljon elő az, hogy annyi bejövő hívás van a T-Com ISDN PRI linken, hogy kihívni már nem lehet. Valahogy tehát el kell érni azt, hogy az E1 30 csatornájából 5db csak kimenő hívásra legyen alkalmas.
Amennyiben a hívás Voip irányba menne tovább, lehetne szabályozni ...]

This is In response to the comment posted:

The ACL has no direct relation to the CBAC firewall, it is there to prevent traffic coming into your network from the outside, the inspection rule is there to inspect traffic going out from your network. if the ACL was not there the traffic would have been inspected but still people would able to go into your network. so if you want to block traffic you must have ACL but if you inspect traffic then even if there is a deny statement on the outside interface traffic is allowed to return. so the short answer CBAC is not inspecting the ACL, CBAC is inspecting what you tell him on the inspection rule.


braindumps
bsci
bsci
build ccie lab
ccie storage lab